asal

  • Full Screen
  • Wide Screen
  • Narrow Screen
  • Increase font size
  • Default font size
  • Decrease font size
E-mail Print PDF

Horizontal Laminar Flow 900-1200-1500-1800 FLO


900 FLO

1200 FLO

1500 FLO

1800 FLO

The horizontal laminar flow hood mod. 900-1200-1500-1800 FLO has been designed and built to allow the processing of controlled contamination products in a sterile environment (sterile preparation, microbiology soils), creating circumscribed area within the limits of class 100 (or ISO 5).

The hood is not suitable for micro-organisms and particles which represent a risk for the operator and the environment.
The laminar flow it is an unidirectional air flow formed by parallel sterile thin thread of air which move at the same speed in every point, so an homogeneous current of air is produced without any turbulence.

In a sterile environment obtained in this way, every contaminator set free in the working area is dragged for away by a sterile source of air.
The air flow is cleaned by an absolute hepa filter class H14.

In this cabinet the sterile air flow coming from hepa filter, which is placed in front of operator and flows parallel to the work surface up to disperse in the environment.

The horizontal laminar flow hood is designed to guarantee the maximum protection degree of the manipulated materials.

Don’t use it if the material can represents a potential danger (pathogen materials), because personnel is directly invested by the airflow coming from the work area.

 

HORIZONTAL LAMINAR FLOW HOOD FLO has been planned, built and tested in accordance with:

2014/35/UE (LOW TENSION)

2014/30/UE (EMC)

2006/42/CE (MACHINERY DIRECTIVE)

2011/65/UE (RoHS DIRECTIVE)


Technical normatives

CEI EN 61010-1 – CERTIFICATION TUV SUD

EN 61326-1 – CERTIFICATION TUV SUD


It complies with the rules:

WEEE Directive 2012/19/UE

CEI 66.5 E CEI 62.25

U.S. FEDERAL STANDARD 209/E

ISO 14644.1

ATTENTION

All the horizontal laminar flow hoods FLO, as an alternative to absolute HEPA filter, can be supplied with absolute ULPA filter (Ultra Low Penetration Air) tested in accordance with regulations C.E.N M.P.P.S 1822 with overall efficiency 99.9995% class U15, which produce a sterile airflow to 0.3 micron class 10 according to Fed Std 209E, (Laser Test Royco 256) or ISO class 4 according to ISO 14644.1.